الصفحة الرئيسية

Seniror Inspector - Quality Tanks

Petrofac Projects and Services Private Limited

نشرت على أكتوبر 22, 2020

10 - 16 سنوات Sriracha, chonburi - Thailand

Bachelor of Science, Diploma(Engineering, Mechanical). التايلاندية

سهل التطبيق

عدد الشواغر 01

الوصف الوظيفي

ايميل الوظيفة
تم إرسال البريد الإلكتروني بنجاح.

Welding :
· Monitoring and reporting fabrication, installation, erection and testing processes of process piping, steel structures, tanks, vessels and metallic items.
· Review of WPS, PQR and weld maps.
· Witness Welder Qualifications.
· Ensure that material/welding consumables are stored and handled correctly, when required material traceability is maintained and correct material used.
· Ensure a system of welding consumable control is implemented.
· Ensure welding machines/baking ovens/quivers are in serviceable condition and where
required is within the valid calibration period.
· Timely inspection during fabrication and construction.
· Check for the qualification of the welding personnel and the kind of materials being used for the process.
· Carry out inspection of work in progress including checking if the right procedure is followed for the welding process.
· Perform visual and dimensional checks.
· Monitor welding process parameters for compliance with approved procedures and project specifications.
· Perform in process (before/during/after) and final visual inspections.
· Prepare/Review Inspection reports(Fit-up, Final Visual).
· Monitor performance of contractors, ensure personnel are qualified and competent to perform allocated tasks, have valid certification, where required, for the welding techniques in use.
· Review test reports including PWHT chart/records for process output compliance with requirements.
· Prepare/review daily welding reports.
Piping/Pipeline:
· Monitor and report compliance with P & IDs, Isometric drawings, codes, standards and procedures; all fabrication, installation, erection and testing processes of process piping.
· Ensure piping installation and test procedure(s) are followed.
· Ensure installation of piping is in compliance with isometric drawings and code requirements with respect to; material, alignment, supports, valve type, valve orientation, heat trace, insulation, marking, tapings, take offs.
· Verify proper size and schedule of pipe, rating of flange face and fittings.
· Ensure satisfactory identification of materials, proper protection of piping and fittings.
· Ensure adequate valve access for operability and maintenance.
· Ensure operation of flange management system to include correct flange class, flange type, alignment, gasket, orifice plate, bolts, washers, nuts, bolt torque, use of insulation kit.
· Responsible for quality control & inspection of piping fabrication activities.
· Line checking and clearing the punch items before the pressure test on completed pipelines.
· Checking the piping materials as per codes and process standard specifications.
· Inspection of shop fabrication of piping spools and supports.
· Visual inspection of plant piping and preparing Punch list after installation.
· Perform inspection on erection and installation of prefabricated pipe lines.
· Checking of Material take off list.
· Review pressure test packages as per P&ID, Isometric drawings, test limit drawings and all related documents and witnessing pressure/leak testing.
· Line check prior to pressure test, ensuring provision of additional supports when required, spring hangers are locked, instruments, orifice plates and equipment are isolated or removed, blind flanges are correctly rated and certified, valves removed or isolated, vent and drain valves installed.
· Prepare punch list prior to pressure test, categorize items, ensure all A-items cleared prior to pressure test.
· Witness pressure test ensure gauges and recorders are within valid calibration, inhibitors in use as required by specification, line flushed, vented and filled. Monitor pressure and sign off records.
· Prepare final punch list of outstanding actions/items, categorize and monitor clearance.
· Inspect line reinstatement, drain, dry and preservation and sign off records.

21. Minimum Job Requirement
• Diploma in Mechanical Engineering or equivalent.
• CSWP 3.2 or AWS SCWI
• Minimum 10 years experience as Welding/Piping/Pipeline QC Inspector
• Should have experience in oil & gas/petrochemical industry
• Should have previously worked with major EPC contractor or their subcontractors


النفط والغاز / البترول

نوعية / تجربة / جواب / مراقبة الجودة / مفتّش

الكلمات الرئيسية

• Diploma in Mechanical Engineering or equivalent. • Minimum 10 years’ experience as Tanks QC Inspector. • API-653 Tanks Inspector Certification. (Preferable). • Must have AWS or CSWIP Welding Inspector’s certification. • CSWIP/ PCN Certificat

الدخول للتقدّمسجّل وقدّمقدّم بدون تسجيل

ابلاغ عن هذه الوظيفة

Petrofac Projects and Services Private Limited

Petrofac is a leading international provider of facilities solutions to the oil & gas production and processing industry, with a diverse customer portfolio including many of the world’s leading integrated, independent and national oil & gas companies.


The group delivers services through seve n business units: Engineering & Construction, Engineering & Construction Ventures, Engineering Services, Offshore Engineering & Operations, Training Services, Production Solutions and Energy Developments.

Through these businesses Petrofac designs and builds oil & gas facilities; operates, maintains and manages facilities and trains personnel; enhances production; and, where it can leverage its service capability, develops and co-invests in upstream and infrastructure projects.

Petrofac’s range of services meets its customers’ needs across the full life cycle of oil & gas assets.
With more than 13,000 employees, Petrofac operates out of six strategically located operational centres, in Aberdeen, Sharjah, Woking, Chennai, Mumbai and Abu Dhabi and a further 19 offices worldwide.

The predominant focus of Petrofac’s business is on the UK Continental Shelf (UKCS), the Middle East and Africa, the Commonwealth of Independent States (CIS) and the Asia Pacific region.

For additional information, please refer to the Petrofac website at www.petrofac.com.
المزيد
عرض تفاصيل الاتصال

الاتصال

الاسم / التعيين:
Inayath Basha C - Manager - Resourcing

عنوان: برج بتروفاك ، طريق الخان ، ص.ب. المربع 23467.
الشارقه
الامارات العربيه المتحدة
23467

موقع الكتروني https://www.petrofac.com


معلومات إضافية مطلوبة

طلب صاحب العمل بعض المعلومات الإضافية مع طلبك للحصول على هذه الوظيفة

تسجيل الدخول الى نوكري غلف

مواصلة استخدام

ستبقى جميع أنشطتك سرية

أو

عرض المزيد من الوظائف
"