Panel Operater
Tawteen
صاحب عمل نشط
نشرت قبل 6 ساعات
أرسل لي وظائف مثل هذه
الجنسية
أي جنسية
جنس
غير مذكور
عدد الشواغر
1 عدد الشواغر
الوصف الوظيفي
الأدوار والمسؤوليات
Control Room Operations
- Operate and monitor all conveying, stacking, reclaiming, and ship loading/unloading equipment through the DCS/PLC or SCADA system.
- Start up, shut down, and adjust plant operations according to standard operating procedures (SOPs).
- Continuously observe process parameters, alarms, and interlocks to maintain safe and efficient operation.
- Respond promptly to process deviations, equipment trips, or emergency conditions by initiating corrective actions or communicating with field teams.
- Maintain constant communication with field operators, marine operations, and maintenance personnel to ensure coordinated performance.
Production & Throughput Control
- Achieve daily vessel loading/unloading and stockyard throughput targets as per operational plan.
- Optimize material flow rates and minimize idle times or bottlenecks in the system.
- Ensure proper material blending, stacking sequences, and reclaiming patterns when applicable.
- Record and report operational data such as tonnage, equipment status, and downtime.
Safety & Environmental Compliance
- Strictly follow HSE procedures, including Lock-Out/Tag-Out (LOTO), permit-to-work (PTW), and confined space entry systems.
- Monitor and report unsafe conditions, dust emissions, and spillages from the control room.
- Support emergency response actions (e.g., fire, spillage, or equipment failure) by coordinating field and control actions.
- Maintain full adherence to port and terminal environmental policies and regulations.
Coordination & Communication
- Maintain continuous radio/PA communication with field operators, maintenance technicians, and the Shift Team Lead.
- Report any abnormalities, alarms, or incidents immediately to the supervisor.
- Prepare accurate shift logs and participate in shift handover briefings to ensure operational continuity.
- Coordinate equipment isolations and restart with the maintenance department.
Process Monitoring & Reporting
- Monitor and log key operating parameters (e.g., conveyor loads, motor currents, bearing temperatures, and system pressures).
- Identify trends, deviations, or potential equipment issues and escalate appropriately.
- Support preparation of downtime analysis, operational reports, and root cause investigations.
Housekeeping & Continuous Improvement
- Support and encourage good housekeeping practices in CCR and plant areas.
- Propose operational improvements to enhance equipment reliability and performance.
- Participate in toolbox talks, safety meetings, and refresher training programs.
Emergency & Abnormal Operations
- Execute emergency stop (E-stop) or isolation procedures in case of unsafe conditions.
- Follow established emergency response plans and assist in plant recovery after incidents.
- Ensure safe re-start of systems after power failures, breakdowns, or maintenance activities.
الملف الشخصي المطلوب للمرشحين
Education / Qualifications:
- Bachelor s Degree / Diploma in
- Mechanical Engineering
- Electrical Engineering
- Instrumentation & Control Engineering
- Industrial Engineering
- Marine or Port Operations Engineering
Additional certification in
- Basic Firefighting & First Aid
- Permit-to-Work (PTW) and Lockout-Tagout (LOTO) Training
- SCADA / DCS System Operation Training
- PLC Basics or Industrial Automation
- Material Handling System Operation (Conveyors, Ship Loaders, Stackers/Reclaimers)
- Port/Terminal Operations Management
Knowledge:
- Basic electrical & instrumentation principles
- Maritime logistics or port operations certificates
- Understanding of ISO standards (especially ISO 45001 and ISO 14001)
- Emergency response and incident investigation procedures
- IT & Systems Knowledge
- Analytical & Continuous Improvement Knowledge
- Leadership & Management Knowledge
- Terminal Operations Workflow
- Control Room Operation
- Port & Material Logistics
Knowledge:
- Basic electrical & instrumentation principles
- Maritime logistics or port operations certificates
- Understanding of ISO standards (especially ISO 45001 and ISO 14001)
- Emergency response and incident investigation procedures
- IT & Systems Knowledge
- Analytical & Continuous Improvement Knowledge
- Leadership & Management Knowledge
- Terminal Operations Workflow
- Control Room Operation
- Port & Material Logistics
Experience:
- Minimum: 3 to 5 years of experience in bulk material handling, port terminal, mining, or process plant operations.
- Preferred: 5 8 years total experience, with at least 2 3 years in a control room or panel operation role.
- In large, automated ports (coal, ore, fertilizer, or clinker), employers often require hands-on experience in DCS/SCADA-controlled systems.
- Exposure to marine terminal coordination (ship loading/unloading schedules).
- Experience with dust suppression, belt weighing, or sampling systems.
- Participation in continuous improvement projects or commissioning of new conveyor systems.
- Prior experience in ISO 45001 / 14001 certified environment.
The skills and competencies you ll have
Thought competencies
1. Situational Awareness & Process Understanding: Ability to maintain a real-time mental model of plant operations, knowing what is running, what s stopped, and how systems interact.
2. Analytical & Diagnostic Thinking: Skill in interpreting system data, alarms, and trends to identify root causes of faults or process deviations.
3. Decision-Making & Judgment: Ability to make timely, well-informed decisions under normal and abnormal operating conditions.
Result competencies
1. Operational Excellence: Achieves smooth, continuous, and efficient operation of all conveying, stacking, reclaiming, and shiploading systems.
2. Equipment Reliability & Uptime: Ensures high availability of terminal equipment through proper monitoring and early detection of faults.
3. Safety & Environmental Compliance: Operates equipment safely and within environmental and port regulations.
People competencies
1. Communication Skills: Clearly and effectively communicates with colleagues, field operators, maintenance, and supervisors.
2. Team Collaboration: Works cooperatively with shift team members and other departments to achieve shared goals.
3. Conflict Management & Diplomacy: Handles disagreements or misunderstandings calmly and constructively.
Self competencies
1. Discipline & Self-Control: Maintains high standards of work behaviour and follows procedures strictly.
2. Focus & Concentration: Maintains attention on critical tasks despite long shifts or routine operations.
3. Stress & Pressure Management: Stays calm and effective during high-pressure situations or emergencies.
القطاع المهني للشركة
- إنترنت
- التجارة الإلكترونية
- دوتكوم
المجال الوظيفي / القسم
- هندسة
الكلمات الرئيسية
- Panel Operater
تنويه: نوكري غلف هو مجرد منصة لجمع الباحثين عن عمل وأصحاب العمل معا. وينصح المتقدمون بالبحث في حسن نية صاحب العمل المحتمل بشكل مستقل. نحن لا نؤيد أي طلبات لدفع الأموال وننصح بشدة ضد تبادل المعلومات الشخصية أو المصرفية ذات الصلة. نوصي أيضا زيارة نصائح أمنية للمزيد من المعلومات. إذا كنت تشك في أي احتيال أو سوء تصرف ، راسلنا عبر البريد الإلكتروني abuse@naukrigulf.com